The PowerPlay 8500 is easy to setup and does not require a fixed IP address or setup hassles of any kind as is common with some web addressable power conditioners. With PowerPlay you simply plug it into an Internet enabled network connection and you’re done. True plug and play through the PS Audio Cloud. The PowerPlay solves one of the biggest headaches found in any home theater installation. Down time. Virtual service calls Home Theater installation experts install the vast majority of modern Home Theaters.  These experienced installers have most likely worked on dozens of installs and they have one very common problem when the work is done: system lockup. One piece of equipment or another locks up or fails to operate and the Home Theater customer can be left with a non-functional system. Typically the installer has to drive out to the customer’s home and reset the power to the malfunctioning equipment so his client can watch a film or listen to music. It doesn’t happen often but when it does it’s no fun for either the dealer or the customer. PowerPlay solves this problem once and for all. If a PowerPlay is installed in the customer’s home, not only does the customer enjoy clean and safe AC power, but the dealer or installer has instant access to every piece of equipment in the customer’s home and help is a simple mouse click away. PowerPlays help keep your system running and everything green Once your system is powered by the PowerPlay 8500 AC conditioner all you or your dealer/installer needs to do is go to the web through any web enabled device, including a Blackberry or iPhone, and access the PowerPlay. From the PowerPlay’s control panel any connected equipment can be rebooted, turned on or off, or have its status checked. It’s that simple. PowerPlay will also monitor your power line quality and report any problems to you through the web page, text alerts or emails sent anywhere you wish.  It’s up to you. PowerPlay’s real-time and on-line measurement system includes surges, voltage levels, power usage and power quality as measured by THD (Total Harmonic Distortion) on the line. With a PowerPlay system installed, not only can you check system and power line status from anywhere in the world, get emails sent to you from the device (if you want) and be assured you’re always connected to the internet, but you will also be able to go a lot greener than ever before. The PowerPlay will allow you to schedule system ‘vacations’ or down time so you’re not burning power when you don’t need to. This can be in the middle of the night, or when you’re on vacation and when you’re ready, PowerPlay turns everything back on for you zone-by-zone. Perhaps there are a few critical components you want to remain on, but others are OK to shut down and save power.  No problem. With PowerPlay you can select any or all zones to control.  For instance, you would never want to shut of your outside communications such as a modem or networking, so these remain always on and ready.  Everything else can take a vacation when you do and save you money. It’s truly a unique system of power management and control, unprecedented anywhere in the world.          Auto reboot capabilities How many times has your home’s modem or router locked up and denied you Internet access? Probably plenty and to fix the problem, you need to pull the power connector out of the modem and reboot the device. With PowerPlay on the job this tedious routine is a thing of the past. PowerPlay allows any zone to be set as an auto reboot zone. Once set, PowerPlay keeps a watchful eye on the Internet connection and should it be disconnected, PowerPlay will automatically reboot your modem, router or any device plugged into that zone. In most cases, homes using PowerPlay will never have to experience Internet down time again. Input naming and customization With 10 zones available on the 8500 it is important to know which piece of equipment is being powered by which zone.  On the PowerPlay 8500 it’s easy.  You can name each zone anything you wish from the 8500’s internal web page, or over the web via PowerPlay’s easy to use graphical interface  Reporting and measuring capabilities Every home’s AC power is different and PowerPlay monitors, inspects and reports everything you or your dealer need to know about power quality in the home.  PowerPlay gives you real time monitoring of power outages, power surges and hourly measurements of voltage levels, power usage and power quality by the onboard Total Harmonic Distortion analyzer. The data is stored on our servers and available via the web interface for PowerPlay.  Customers and their designated dealers can look at power quality over time, or drill down to specific times of day to find out if there’s a problem involving the home’s power.  Our research over the years has shown that sagging voltages, high distortion and multiple brownouts are occurring more than one might think.  With the installation of a PowerPlay PC in the system, you can accurately record events and present them to either the utility company for repair or add other PS power tools to solve problems. Email alerts Some power quality problems can be serious, such as repeated brown or blackouts, high levels of surges or equipment downtime.  Many dealers and installers will want to know right away if one of their customers has a problem in the system so they can take immediate action. PowerPlay is setup to generate email and text alerts to any designated recipient. The four events that can trigger a notification event are: PowerPlay offline, Auto Reboot event, UPS Battery alarm and a monthly summary of all events. So, in the event communication with the PowerPlay is lost for any reason, an automatic reboot event occurs, or if the attached UPS is activated, your dealer will be automatically notified of the problem by the email event system internal to PowerPlay.    IR control of every piece of equipment In some events it will be necessary to directly control the attached equipment.  For example, if there is a power outage and the PowerPack UPS takes over delivering power to the system, it may be necessary to start shutdown procedures on some equipment.  Projectors, for instance, should have their lamps turned off while keeping their cooling fans running long enough not to damage the projector bulb.  The commands to turn off the projector bulb, turn on or off a piece of equipment while power continues to remain on are handled through infrared (IR) commands similar to a hand held remote for the same device. PowerPlay can be assigned up to 15 separate IR commands for any zone and these IR broadcasts can be triggered by any number of assignable events.  This helps PowerPlay maintain complete control over not only the AC power to your system, but by directly controlling that same equipment through a remote control. Intelligent UPS control An important part of the PowerPlay system is the UPS alert system.  The 8500 is designed to work with most major brands of UPS as well as our own UPS 1500.  Connecting a compatible UPS via USB, communication between the PowerPlay 8500 and the UPS is established and in the event of a power outage, can trigger IR events as well as email notifications.  This permits your dealer or installer to configure the 8500 to shut off or power down certain critical home theater components in the event the UPS is required to power the system for any length of time. For example, it is critical to maintain outside communication through a modem or router in the event of a power outage; but not as important for a subwoofer to remain powered.  With PowerPlay you can assign any zone an importance level that will permit that zone to shut down if the battery of the UPS falls below a certain level, thus protecting the system for hours at a time in the event of a power outage. AC cleaning and protection The PowerPlay 8500 has 10 separately controllable AC receptacles, fed from 5 isolated cleaning zones.  Each cleaning zone has both common mode as well as differential mode AC cleaning that lowers noise by an amazing 80dB.  For safety of connected equipment, the PowerPlay 8500 features 7344 Joules of spike protection as well as fully automated over/under voltage control for surges. The PowerPlay line of AC power conditioners provides world class power cleaning and safety, with a remarkable degree of control and simplicity of installation unmatched by any product anywhere in the world. All home theater and well done high-end music system protect their investments by running everything through a power conditioner.  Why not make sure that power conditioner does more than just clean and protect?  After all, your investment is one worth protecting as well as maintaining in good order.   Specifications Weight 10 lbs. Rack Ears Included Dimensions 17 in. W x 16 in. D x 1.75 in H AC Power Under-voltage shutoff 90 VAC ¬± 2 VAC UL1449 Suppression Rating 340V Total Current Capacity 15 A Thermal Fusing Yes Protection Modes L-N, L-G, N-G Peak Impulse Current 96,000 Amps Over-voltage shutoff 144 VAC ¬± 5 VAC Line Voltage 120V, 60Hz Initial Clamping Level 200V Energy Dissipation 7344 Joules EMI/RFI Noise Filtration High Current (Zones 1&2) 60 db, 100 KHz – 2 MHz All others (Zones 3-10) 80 db, 100 KHz – 2 MHz DC Trigger Input Voltage¬† 5 – 15V DC Jacks 3.5mm mono mini-plug, Center positive Current Requirement 3 mA @5V, 12 mA @15V DC Trigger Output Voltage¬† 12V DC +/- 25% Jacks 3.5mm mono mini-plug, Center positive Current Available 50mA max Short circuit protection Yes LAN Circuits Wires Protected 8-Wires Jacks RJ-45 Compatibility 10/100bT Clamping Level 11V Telco Protection Wires Protected 4-Wire Protection Modes L-L and L-G Connectors RJ-11 (2) Clamping Level 395V Universal Coax Protection Shielded Yes Insertion Loss < 0.5 dB HD 1080 i/p Ready Yes Frequency Range DC- 2GHz Connections Female “F”, Gold Plated Clamping Level 75V Bidirectional Yes IR Input Voltage¬† 5 – 12V DC Jacks 3.5mm mono mini-plug, Center positive Frequency 32-48KHz IR Output Voltage¬† 12V DC +/- 25% Jacks 3.5mm mono mini-plug, Center positive Frequency 32-48KHz Short circuit protection Yes

Write a review

Please login or register to review

PS Audio - PowerPlay 8500 Power Center

  • Brands PS Audio
  • Product Code: 1530
  • Availability: In Stock
  • $2,999.00